Hammocks are fabrics or pieces of cloth used as slings for resting or sleeping while hanging above the ground. It usually consists of two or more fabric panels, cloth panels or thin ropes expanded with wires between four firm points like posts or trees. Hammocks are now famous around the globe for relaxation. In addition, it is popular in camping trips.
It is protected against rain, root and mold. Hammocks have many different types according to materials used, like nylon, nylon rope and single nylon hammocks. A nylon hammock is made of quality craftsmanship and durable materials. Nylon ropes are elastic, lustrous and stronger. Single nylon ropes are about 7 feet long and 4 feet wide.
Tips on Making Rope Hammocks
Materials include polyester ropes for long-lasting hammocks, 2lbs hammock ropes, 1 gauge stick, 1 large netting shuttle, 2 rings about 2 to 3 inches in diameter, 2 hardwood bars (33 inches long and 1 1/2 by 1 1/2 inches).
Step 1
Measure and cut about 1 or 2 pieces of rope. Tie the ends together into a square knot. Hang the rope on a post, doorknob or tree. Get the netting shuttle and grip it in point end up. Twist the cord a few times around the netting shuttle and tie the end into a loop on the post, doorknob or tree.
Step 2
Use the gauge stick to twist the netting shuttle cord around it. Pass the netting shuttle throughout the loop and grip the cord tightly. Create a half hitch and continue creating loops until the gauge stick has about 15 to 20 total loops.
Step 3
Take out the gauge stick from the loops and grip it directly underneath. Rotate the ropes such that the netting shuttle is on the left side. Get the netting shuttle cord down to the front portion of gauge stick and bring it at the back, placing it throughout the first loop. Move around the first loop with the netting shuttle cord and create a hitch. Repeat the movement until it is completed on all sides.
Step 4
Place more than 10 ropes around the netting shuttle when it runs out. Tighten the free end in the square knot to the first old hammock. Keep repeating step 3, creating rows of loops with a rope. Generally, the length will is approximately 7 feet if there are 50 to 55 rows.
Step 5
Cut the first loop and remove it. Change it with dowel to give it stability and maintain the rows smoothness while working on it. Get about 2 pieces of hardwood cut into 33 inches in length and 1 1/2 by 1 1/2 inches. Bore or drill each piece with 15 to 20 holes, making sure that it is not closer that 2 1/2 inches from each other and that it is 1 1/2 inches apart from each other.
Step 7
Gather about 40 pieces from a 50-inch long rope. Get a 2 inch ring and loop the initial cord through it. Run it equally through the ends of the cord via the first bored hole in the hardwood. Tighten an overhand knot and secure each piece of rope from the woven hammock.
Hammock Swings
Hammock swings are worktables or benches made from a cushion or rope webbing suspended from about two different secure points such as posts or trees. The gentle swinging motion of a hammock is truly enjoyable and relaxing. A hammock swings swiftly, making it a famous addition to numerous homes whether placed outdoors or indoors.
Author Resource:-
For more information on Rope Hammocks and Hammock Swings please visit our website.
http://www.rope-hammocks.com &
http://www.rope-hammocks.com/hammockswings.htm
![[Valid RSS feed]](http://www.natureezine.com/images/icon_Rss.png "XML Feed For RSS"){kind=icon}
Category Rss Feed
Print This Article
Add To Favorites
